How to produce mechanized charcoal
Once the mechanism charcoal machine with remarkable advantages was introduced, it was highly praised. Do you know how the mechanism charcoal was produced? The following mechanism charcoal wholesale consultant will give you a brief introduction.
Machine-made carbon, also known as man-made carbon, recycled carbon, smokeless clean carbon, is a carbon rod made by extrusion of wood fragments. It has a wide range of sources: such as barley hull, peanut hull, cotton hull, corncob, corn stalk, sorghum stalk, etc. can be used as raw materials to produce carbon rod. Sawdust particles and bamboo chips are the best, with high density, high calorific value, smokeless, odorless, pollution-free, explosion-free and easy to produce carbon rod. Burning is an internationally recognized barbecue green environmental protection product.
Now machine-made charcoal is basically produced by machine-made charcoal equipment. The carbon yield of mechanical charcoal equipment is inversely proportional to the firing temperature and time. The higher the firing temperature and the longer the firing time, the lower the carbon yield, and the higher the calorific value and the better the quality of charcoal. When the fuelbars are loaded into the kiln and fired at different temperatures for different periods of time, different weights of finished charcoal will be obtained; if the medium-temperature charcoal is fired (domestic barbecue, chafing dish, heating charcoal), the temperature in the kiln is about 400 C, and the carbonization time is 6-7 days, the yield of charcoal is about 40% - that is, 1 ton of mechanized charcoal is obtained from 2.5 tons of raw materials. The relationship between the breakage rate of mechanism charcoal and the application technology of energy saving and new energy sources, as well as the utilization of waste and turning waste into treasure, mechatronic charcoal equipment can meet the indispensable charcoal raw materials and additives in industries such as industry, agriculture, animal husbandry, metallurgy and so on. Machined charcoal equipment has stable quality and high profit: the specific factors of equipment can make the charcoal produced stable and beautiful.
That's all about how mechanism charcoal is produced. Thank you for reading!