Huzhou fusheng charcoal co.,LTD.
Contact person: Mr. Cao
E-mail: 13567228395 @163.com
Address: huzhou hefu town industrial park
The dryer has several modes, such as belt drying, drum drying, box drying, tower drying, etc. The heat source includes coal, electricity, gas, etc. The material has hot air flow and radiation type in the drying process. The hot air drum drying is the hot air flow moving forward from the tail, fully contacting with the material and making full use of heat transfer through heat conduction, convection and radiation. The moisture of the material is evaporated continuously in the cylinder body, and the air intake device at the inlet and outlet pumps out a large amount of moisture and wet air to prevent the secondary pollution caused by dust discharge; through internal spiral stirring, sweeping and plate reading, the material movement is promoted to complete the whole drying process; counter-current conduction dehumidification avoids repetitive drying procedures.
Dryer is a kind of drying equipment for handling a large number of materials. It is one of the concerns of users that it has high efficiency and high output. With the advocacy of the concept of energy saving and environmental protection in recent years, drying equipment pays more and more attention to the improvement of energy saving direction while ensuring efficiency and output. One of the more important links is to reduce heat loss to a greater extent.
In the process of material drying: wet material is sent to hopper by belt conveyor or bucket elevator, and then through the hopper feeder into the feeding end through the feeding pipe. The inclination of the feeding pipe should be greater than the natural inclination of the material, so that the material can flow into the dryer smoothly. The cylinder of the rotary dryer for river sand is a rotary cylinder slightly inclined to the horizontal line. The material is added from the higher end, the heat carrier enters from the lower end, and contacts with the material in countercurrent. There are also heat carriers and materials flowing into the cylinder side by side. As the rotating material of the cylinder moves to the lower end under the action of gravity. Industrial dryer is a commonly used drying equipment in mineral processing industry. Today, with the rising raw materials, we always adhere to the line of environmental protection and energy-saving, so as to benefit users, let dryer users really feel the care from manufacturers, in order to continuously expand our market sales of dryer equipment.